Fiberglass Enclosure

Avoiding Mistakes When Fitting a Fiberglass Enclosure

You should be able to build a fiberglass enclosure without much difficulty, however it is one where you can have a disaster if you make certain critical mistakes. You need to make sure that you don't keep the carpeting of the vehicle anywhere near where you are installing as you will damage it beyond repair. The carpet is easy to remove, so that is the first thing that you should do. And besides damaging things, you could harm yourself if you don't follow basic safety procedures.

Safety is very important, so we've devoted this next bit on that subject. Proper ventilation and the avoidance of any potential fire hazards are the first essential. If you are a smoker, do without the habit until the job has been completely finished and you have restored everything to its original state. Even if the area you are working in is well ventilated, which it needs to be, it is still better to wear a dust mask for safety and protection. Fitting fiberglass enclosures can be tiring and oppressive work.

To make life easier on yourself, you should gather together the materials that you are going to need to use. You will need brushes and mixing containers, and the brushes should be ones you are prepared to just discard at the end of the job. Don't expect to get them clean again so you can use them with paints, for example. Protect your hands with rubber gloves, and make sure that they are hard wearing. You will need some cloth, and the resin and body filler to complete the task.

Once the carpet has been removed and relocated temporarily to a safe location, the trunk should be given a thorough cleaning. Attempting to work with a dirty surface can only impair your results. Lay two layers of resin, one after the other. You will be stuck with a bit of an annoying wait while the first layer dries, but that cannot be avoided. The good news is that you don't have to wait until the layer is completely dry before you move on. Building fiberglass enclosures can create fumes, so take the opportunity to get outside and breathe.

You need to make sure the speakers are well sealed since any chance of movement will impair the result. You will get unwanted juddering sounds. If this happens, all you can do is apply more sealant to the area until the problem has been cured. The only slight disadvantage in the long term will be that the unit will not look as neat as it could have done. It should function exactly the same as if the join had been more accurate originally. You should get many years of service and long life out of your new fiberglass enclosure.

 

 

Many, if not all of the links on this website are affiliate links which means that we will be compensated if you choose to buy at some point in the near future. Please accept our sincere thanks for your support.

Technorati Tags: Fiberglass, Fiberglass Products, Fiberglass Enclosure

Articles

• Fiberglass Pools
• Fiberglass Deck
• Fiberglass Enclosure
• Fiberglass Patio
• Fiberglass Spas
• Painting Fiberglass
• Fiberglass Buildings
• Marine Fiberglass
• Fiberglass Window
• Fiberglass Wood
• Fiberglass Doors
• Fiberglass Mold
• Fiberglass Products
• Fiberglass Resin
• Fiberglass Paint
• Fiberglass Parts

• Social Bookmark This Page
• 
• 
• 
• 
• 
• 
• Privacy Policy
• Terms of Use
• Contact Us
• About Us
• Sitemap